iPhone 4 proximity sensor fix
The iPhone 4 proximity sensor is suppose to detect when your face is against the glass and turn off the screen, so that you don’t inadvertently press buttons or accidentally mute your caller. Problem is sometimes the screen still lets in some light confusing the sensor into thinking it’s not being covered. What we’ve noticed is this problem is inconsistent. Some sensors seem to be more sensitive than others. Here’s a pretty simple fix we’ve been using with high success to alleviate the problem.
What you’ll need is…
- Electrical Tape
- Small razor blade or x-acto knife
iPhone 4 proximity sensor fix instructions:
- Make two small rectangles out of the electrical tape. Make them small enough to cover up the sensors shown below. Figure 1.
- Cut two smaller rectangles inside each of the two rectangles you made in step 1. Figure 1.
- Take the first completed cover and place it over the proximity sensor fix Figure 2.
- Take the second completed cover and place it over the proximity sensor fix. Figure 3.
- Reassembly your iPhone 4 and that should take care of the issue.
iPhone 4 proximity sensor fix image references
Did this iPhone 4 proximity sensor fix work for you?